These are the main elements of the system made of grade A2 or A4 stainless steel. The brackets distribute and transfer the vertical decoration brickwork loads to the supporting construction. During mounting it is possible to regulate the height of the beam up to 21 mm – this is defined under the design of the beam. The maximum typical bracket protrusion is 300 mm. It is also possible to produce brackets with protrusions up to 500 mm. The brackets are attached to the concrete basis of the supporting construction by using chemical anchors made from glue capsule RM and a threaded bolt from stainless steel.
Ordinary bracket
Another version of the ordinary bracket
Larger load capacity bracket with smaller „cold bridge“
Ordinary bracket with prolonged ledge
Right end bracket
Left end bracket
Ordinary double bracket
Right corner bracket
Left corner bracket
Bracket for lintels
Right corner bracket
Left corner bracket
Download BAUT® system bracket catalogue in pdf. format. There you will find all bracket configurations and parameters. As well as the principal attachement schemes.
The type of the brackets and distances between the brackets is estimated on the actual loads and façade constuction solutions. Typical brackets are attached to the building framework, as a rule with one brick distance. In such a case the main brickwork on the brackets can be laid up to 2 stores. When the 2nd store is reached, the brickwork is interrupted. The next brackets row is mounted and brickwork laying is continued higher. The decoration brickwork can protrude from the edges of the bracket support. The protrusion size depends on the thickness of the brickwork, but no more than 25 mm.
Ordinary bracket
Another ordinary bracket. It can be alternated by using KРs at the distance of one brick in between
Ordinary bracket with prolonged ledge
Right and left end brackets
Right and left end brackets, which allow suspending the lower couse of brickwork
Ordinary double bracket
Right and left corner brackets
Bracket for lintels
Right and left corner brackets
BAUT® covers both simple and complex decisions for various purpose and height brickwork facades.
The major attention is focused on the suspended brickwork facades. BAUT® offers a wide range of brackets made from stainless steel which help to solve various complex architectural forms.
Read more about system
Copyright © 2024. UAB "Bautopas". All Rights Reserved.
